Zum Inhalt

Chapter 10: FAQ & Troubleshooting

A guide to diagnosing and resolving errors, connection issues, Android specifics, and device configurations in the Stromnetz Pro.


🌳 Quick Diagnosis & Triage Flowchart

For acute operational issues, the app provides structured triage for rapid error localization and resolution:

flowchart LR
    Start["🔍 Incident Fault"] --> M1["📶 Wireless & Mesh Sync"]
    Start --> M2["📱 App & Grid Plan"]
    Start --> M3["🔔 Alarms & Standby"]

    M1 --> R1["1. Enable BT & Wi-Fi<br>2. Check Nearby permissions<br>3. Restart sync server"]
    M2 --> R2["1. Clear app cache (no data loss)<br>2. Enable Gloves Mode<br>3. 'Auto-arrange nodes'"]
    M3 --> R3["1. Ignore battery optimization<br>2. Check Do Not Disturb<br>3. Adjust calculation interval"]

    classDef startNode fill:#fee2e2,stroke:#ef4444,stroke-width:2px;
    classDef category fill:#dbeafe,stroke:#1d4ed8,stroke-width:1.5px;
    classDef action fill:#f8fafc,stroke:#cbd5e1;
    class Start startNode;
    class M1,M2,M3 category;
    class R1,R2,R3 action;

🚨 Emergency Triage Matrix for Machinists

The following 4-column matrix serves for immediate, prioritized troubleshooting on site:

Symptom / Alarm Possible Cause Immediate Field Action Prevention & Standards
Phase Unbalance > 30% Single-phase heavy loads bundled on same phase. Re-plug consumers on distribution boxes to other phases (L1/L2/L3). Check phase balance in grid plan before powering on.
Voltage Drop > 3.0% Line too long or cable gauge too small. Uncoil cable reels; increase cross-section (\(2.5\,\text{mm}^2 \to 4\,\text{mm}^2\)) or move generator closer. Perform line calculations in grid plan prior to laying cables.
P2P Sync Fails Distance too far, debris, or reinforced concrete walls blocking radio. Place secondary device as relay midway; restart sync server in Settings. Operate tactical Wi-Fi access point at command vehicle.
Missing Map Tiles Offline map package (MBTiles) not preloaded. Import MBTiles ZIP via USB drive in Map Manager. Verify full region download before departure.
Forgotten PIN Security code not handed over orally during shift change. Use organization master password or export emergency logs. Establish uniform unit PIN at start of duty.

⚡ Extended Software & System Triage (SW-01 to SW-18)

Code Issue & Technical Cause Immediate Operator Action Menu Path & Details
📶 Mesh / SW-01 Endless Connection Attempt
Bluetooth/Wi-Fi channel blocked by prior attempt.
1. Tap “Restart Sync Server”.
2. Toggle Bluetooth and Wi-Fi off/on for 5 seconds.
Settings → System & Background Services
📶 Mesh / SW-02 Warning: App Signature Mismatch
Devices run different test/release builds.
1. Verify build numbers (v1.0.0.XXXX) across tablets.
2. Install identical official release.
Menu → About
📶 Mesh / SW-03 Transfer Abort on Large Grids
Radio drop on high data volume due to distance.
1. Move within 3 meters for initial sync.
2. Tap sync icon; app resumes missing data automatically.
Mesh Dialog / TopAppBar
📶 Mesh / SW-04 3 Failed Attempts (Lockout)
Security lock after 3 invalid confirmations.
1. Wait 60 seconds for lock to expire.
2. Or toggle sync server off/on on host.
Settings → Connectivity
📶 Mesh / SW-05 Device Not Found in Scan
Stealth Mode silently disables radio interface.
Turn off “Stealth Mode” to allow radio visibility and connection. Settings → Connectivity → RF Security
📱 App / SW-06 Mission Data Missing After Crash
Android locked file access temporarily after reboot.
1. Clear cache (no data loss).
2. Connect to command tablet via P2P mesh to reload grid.
Android Settings → Apps → Stromapp → Storage
📱 App / SW-07 Data Missing After Battery Depletion
Tablet shut down before saving dialog.
1. Always tap save button on dialogs.
2. Plug in power bank when battery < 15%.
Editing Dialogs
📱 App / SW-08 Template Import Error
Template file corrupted or from incompatible version.
1. Only use native export function.
2. Re-export template on source device.
Settings → Template Management
📱 App / SW-09 Drag & Drop Unresponsive
Raindrops or palm resting on screen.
1. Switch view briefly and return.
2. Dry display.
3. Enable “Gloves Mode”.
Settings → Appearance
📱 App / SW-10 Nodes Overlap in Grid Plan
Multiple components placed on same coordinates.
1. Tap “Auto-arrange nodes”.
2. Or switch to hierarchical tree view.
TopAppBar in Grid Plan
📱 App / SW-11 Dialog Closes on Screen Rotation
Android recreates activity on orientation change.
Lock screen rotation in landscape mode in Android quick settings. Android Quick Settings
🔔 Battery / SW-12 Sync Stops When Screen Locks
Battery saver puts app into deep sleep.
Set “Ignore Battery Optimization” to Allow and select “Unrestricted” battery usage. Settings → System & Background Services
🔔 Alarm / SW-13 Acoustic Alarm Muted
Silent mode or Do Not Disturb blocks alarms.
1. Allow alarm override in Do Not Disturb.
2. Check “Audio Warnings” toggle.
3. Raise volume.
Settings → Appearance
🔔 Battery / SW-14 High Battery Consumption
Short calculation interval (5 s) with max brightness.
1. Set calculation interval to 30 s or 60 s.
2. Enable Dark Theme (Slate) on OLEDs.
Settings → Appearance & System
🗺️ Map / SW-15 Tactical Map Displays Gray Tiles
Region MBTiles missing or tile cache fragmented.
1. Perform “Clear Tile Cache”.
2. Load region package or import via ZIP.
Settings → Mission Tools → Offline Maps
🗺️ GPS / SW-16 GPS Location Inaccurate / Jumps
Signal shielded inside vehicles/buildings.
1. Set Android Location to “High Accuracy”.
2. Position tablet with clear sky view briefly.
Android Permissions
📄 Export / SW-17 PDF Report Does Not Open
No default PDF viewer associated.
1. Install PDF viewer.
2. Tap “Share” in export dialog to send via Bluetooth.
Mission Reports & Export
📷 QR / SW-18 QR Code Not Recognized
Dirty label, fogged lens, or poor lighting.
1. Turn on camera flash via light icon.
2. Clean lens.
3. Regenerate code via QR Generator.
Camera Scan / QR Generator

🛠️ Diagnostics & Log Export

If an issue cannot be resolved, the app provides a simple export feature for diagnostic logs.

Exporting Diagnostic ZIP:

  1. Open Settings and navigate to Security & Access Control.
  2. Tap “Security & Error Logs”.
  3. Tap the Export icon (📤) at top right.
  4. Save stromapp_logs.zip or share it via email or messenger.

❓ Frequently Asked Questions (FAQ)

1. Which Android versions are supported?

The app runs on all devices from Android 8.0 through Android 15+. Android 10+ is recommended for optimal wireless performance.

2. Why does the app require location access if maps are unused?

Android requires location permission for Bluetooth and Wi-Fi scanning. The app uses this solely for P2P mesh discovery and mapping.

3. Does the app work without internet or Google services?

Yes. All core features (grid plan, VDE calculations, fuel logistics, templates, and reports) operate 100% offline without internet access.

4. What happens to active missions during app updates?

All mission data is preserved. Database migrations run automatically on first launch following an update.

5. How do I prevent the screen from turning off during deployment?

Enable “Ignore Battery Optimization” in app settings and set screen timeout to at least 10 minutes in Android settings.

6. How many devices can join an operational mesh network?

A command tablet host can stably serve 8 to 12 mobile operator devices simultaneously.

7. What happens if two operators make conflicting edits?

The app merges field-level edits automatically using Last-Write-Wins (LWW) timestamping.

8. How can a grid model be transferred without wireless sync?

Export the mission as a JSON file via Export Mission and transfer it via USB drive or SD card.

9. Where are exported PDF reports stored?

Exported reports are saved in the internal device Downloads folder and app document directory.

10. How do I protect the app from unauthorized edits?

Enable PIN Protection in Settings → Security & Access Control. Critical actions then require PIN confirmation.